Learning and learning Photoshop like the students

[kodybyan64ap]

Photo Name: Photoshop,


Photo name: bring up photos soft blue and yellow - a simple way,
1, open the original material, press Ctrl + J to the background Copy a layer of layers, point channel panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, opacity 50%, RP tick,
2, Back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black, layer blending mode to Multiply and Opacity to 60%, select the middle part of the constituency Elliptical Marquee Tool, press Ctrl + Alt + D Feather, a value of 70, and then double-click the Delete key to delete, again on the text, complete the final results.


Photo name: bring up photos beautiful red and yellow,
1, open the original material, Ctrl + J to copy the background layer a layer, press Ctrl + Shift + U to color, Enforcement: Filter> Fuzzy> Gaussian Blur, number 4, for the color filter layer blending modes, layer opacity to 27%.
2, create a new layer, press Ctrl + Alt + Shift + E stamp layers, layer blending mode to color. 3, create a gradient map adjustment layer, purple - orange, Alt + Ctrl + G with clipping mask.
4, create the brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 , create a Levels adjustment layer, 8,1.00,255
7, the color adjustment layer to create an optional, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,


Photo Name: publicity to create beautiful ice blue tones,
1, making plans ahead of the diagram: Image - Adjustments - Auto Levels, Auto Contrast, Auto Color adjustment,
2, open the original image, copy the background layer,
3, New Hue and Saturation adjustment layer, red: -80, yellow: -80 Blue: +32
4, color balance: -20, +20, +50
5, curve adjustment, value: 38,36
6, hue saturation, blue: -45
7, optional colors, blue: -10, +20, +24,0, blue: +20,0, +10,0, neutral colors: (black) +5, black: (black) +5
8, load the blue channel selection, do curve adjustment, value: 74,119
9, brightness, contrast: 0, +10
10, back all the layers, (Ctrl + Shift + Alt + E), to soften the picture a simple processing such as dermabrasion,
11, to start copying the background copy layer top, mixed mode to Soft Light and Opacity 25%
12, once all the plans stamped layer, marked with light effects, filter - render - lighting effects, opacity 50%, other values ​​to default. Add a mask to rub back overexposed,
13, brush on your favorite brush, add text, complete


Photo Name: elaborate water on a woman,
1, open the original material, the first hook with the pen tool to figure out, press Ctrl + Enter the path into selection, press Ctrl + J to copy characters to the new layer.
2, press Ctrl + M characters on the cutout adjustment curve, numerical: 47,60
3, create a new layer, fill color: # 0A6A60
4, the figures on the skin to the head of this half to pull out, copy to new layer.
5, the foreground color is set to bright green (the color of the water needs to be set according to the required mapping), the background set to white, select the menu: Image> adjustments> gradient map. Adjust the images are monochrome chiaroscuro.
6, Filter> Artistic Effects> plastic packaging, data adjusted according to individual needs to be done, the main effect of the extraction of a high-light some of the water, so the mapping is made of water one can imagine the face of high light adjust the density and degree of evacuation, according to the characteristics of the water, people can receive the information the eye is the only high-light the darkest part of the other part is transparent.
7, select the layer 3 copy, press Ctrl + Alt + Shift + ~ tune out the high-light selection, press Ctrl + Alt + Shift mouse click on the layer 3 copy, so the people outside the constituency to lose, and then the new map Layer 4 fill white.
8, Ctrl + click on the layer 4 turn into a selection, press Ctrl + Shift + I invert the selection, press Delete to delete, clean, delete a few more points.
9, the layer 4 into constituencies, select the copy of layer 3, point mask button (which can be adjusted to hide the dark layer). Then brush the figure on the extra high light wipe, 3 copies of the same layer have established mask, wipe off the excess high light.
10, layer 3 is set to Drops material to find online.
11, it is best to find the water black background material, if it is white or other colors of the water background material, can reduce or reverse the saturation of the background to black, set the color filter layer properties will Black masked, leaving only the white transparency of the water, when the collage to see the direction of the water to find a suitable location collage up, to take advantage of the mask to the interface between water, people place the root handle.
12, the background color of the final deal.


Photo Name: making horror movies,
broken glass brush: Broken Glass brush
blood brushes: Blood stain brush.
1, press CTRL + U to adjust the Hue / saturation, color tick, value: 220,26, -9
2, change the color of eyes, with the lasso tool to select the eyes. Then adjust the hue / saturation, color tick, value: 117,47,7
3, with a dark tone 13px -15 px brush draw around the eyes, set in black, mode to Multiply, opacity 25 %, flow rate 25%, draw around the eyes, the same method to modify the lips.
4, create a new layer, fill color # 31425e,
5, broken glass brush painting.
6, add a layer style, projection, Multiply, opacity 75%, angle 120 °,
7, CTRL + E Merge layers, with the lasso tool to select the broken area, change the opacity to 80 % Duplicate the layer, adjust the mode to Multiply,
8, Filter - Render - Lighting Effects, points of light, intensity 53, focus 69,
9, the last brush and then draw some blood blood


Photo Name: Photoshop Creative Synthesis poster printer,
1, open the background and the printer material, pull out the printer, copy came in the appropriate position gracefully.
2, open the leopard material, adjust the delay came in the appropriate size and angle, with the pen tool to pull out of the leopard to the new layer.
3, tick the printer paper with the pen tool the outline path into selection and press Ctrl + Shift + I invert the selection, press Delete to delete,
4, the paper layer to the stroke, and then go Gamon Edition In addition to the excess part,
5, in a new layer above the layer of paper, paint brush with black leopard right front foot of the shadow of the shadow of the printer and paper, due to lower transparency,
6, more need to add the final advertisements and text to complete the final results.


Photo name: bring up nostalgic landscape photos,
1, open the original copy layer
2, curve adjustment, numerical RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance, value: 0,0, -34
5, optional colors, neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56%,
7, the clouds pull material into the diagram, into the original top, soft layer model, the addition to the Sky wipe out some outside, sealed layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50 , layer mode exclusion, copy a layer, filling 52%
10, curve adjustment, numerical RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, Levels, value: 29,1.00,227, filling 58%
13, optional colors, neutral colors: +16, +12, -11, +5
14, stamped map layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46 %, filling 48%,
16, Ctrl + E Merge Visible, sharpening photos look


Name: the real picture transfer plaster statues,
1, the background copy of a layer with the pen tool to pull out the first part of the eye, Ctrl + Enter, the path to transform into a constituency, with a straw, draw around the white of the eye color, eyes will be filled,
2, a new layer, in the copy layer using the Pen tool to describe the contours of the human out of the path and turn electoral boundaries, by Ctrl + C, Ctrl + V to paste the new layer
3, select the Clone Stamp tool, the edge of the forehead hair is slightly for modification, after the completion of a copy of the layer, and turned into a Smart Object layer.
4, Filter - Stylize - Emboss,monster beats studio headphones dr dre, angle 135 °, height 3, number 142, Filter - Noise - the middle value, the radius of 2. Change the layer blending mode to overlay】 【.
5, add a black and white adjustment layer, and load the first line of the path described by Ctrl + Shift + I reverse and fill the black, so that part of the screen, only to become a black and white portrait images.
6, select the Clone Stamp tool, the rim of the eye and ear a little modification.
7, with the pen tool, hair and eyebrows were selected together, then cut to the color layer on layer. Ctrl + C, Ctrl + V, to replicate a close eye and other layers.
8, cut to the channel panel, copy the red channel, Filter - Blur - surface blur, radius 2, threshold 33%, hold down the Ctrl key is completed, the red color version thumbnail point against it.
9, back to the Layers panel, set the foreground white, new layer, Alt + Del keys, the white filled the entire selection.
10, cut to just the copy of the hair, eyebrows and layers, the first effect of the relief, then into black and white. Data refer to the value before the eyes, eyebrows and hair contrast with the great change, with the main bit out of tune, add a layer mask, to cover up an unexpected place.
11, to load the path described by the previous line, press Ctrl + Shift + I, reverse selection, draw around the color, the use of suction tools, slight modification of the original hair.
12, As some of the details of the parts, using brush and imitation stamp tool, the modified back and forth and you're done friends!


Photo Name: young people deal with the delicate skin out,
1. Duplicate the background layer. Filter - Blur - Gaussian blur radius to 10.
2. set the layer blending mode to Double-click the layer name to open the right mixture of options. In the Advanced Mixed, cancel advanced R and G channels,
3. Use of the color balance of the image curve, according to the picture to decide
4. Create a new layer, select the repair Brush (J), select layer sample. Freckles or blemishes on the large, imitation removed.
5.ctrl + shift + alt + E, stamp all layers, tick the skin part, you can choose their own way, I prefer the pen tool, but you can also use the Polygonal Lasso tool, to Note that to deal with the skin, so to remove the eyes, eyebrows, lips, nostrils. Anti-selection (ctrl + shift + i) delete the addition to the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode to


Photo Name: tune out the brilliant color photos,
1. Open the original image, Ctrl + U, Hue and Saturation, Hue -79, Saturation -22, Lightness +17, br> 2.Ctrl + M, tone curve, the red channel, slightly raised up a number,
3. Create a new layer, set the foreground color: # F9DA06, background color set to black, Filter> Render> clouds, Ctrl + Alt + F to enhance look, layer blending mode to Shift + Alt + E back layers, filter> artistic effect> painting painting, brush size 6, Sharpness 0, brush type is simple, add a layer mask, and some of the people some of the following ground black brush wiping out
5. Create a new layer fill color: # ADF871, layer blending mode to fresh tune.
6. Create a new layer, Ctrl + Shift + Alt + E back layer, Ctrl + Shift + U to color, layer blending mode to
7. Create a new layer, Ctrl + Alt + ~ tune out the high-light selection, fill color: # FBF4C4, layer blending mode to . Create a new layer, Ctrl + Shift + Alt + E back layer proper look at the details of the modification, the final sharpening photos look


name: a simple way the old tune,
1. Open the original image, hue saturation: saturation -55
2. to be the red channel curve comparison, numerical and extent based on pictures, doing the color contrast of green channel, blue channel reverse comparison, br> 3. hue saturation: saturation -35
4. Duplicate Layer, Filter - Other - High Pass, I use the value is 250, mixed mode to Multiply,
5. do a Gradient Map adjustment layer, black - white,
6. Filter - Blur - Gaussian Blur, radius of 4, can increase the image of mystery, given rise to people,
7. the picture on the uncoordinated -100 blue saturation, brightness -100,


Photo Name: black and white retro color,
1. Open image, duplicate the layer, using the lasso tool (more polished and clean ) hook out of the skin, (channels can also be), copy the hook out of the skin,
2. Image - Adjustment - optional colors, neutral colors: -49, -5, +100,0
3. tick on the part of the copy, image - adjustment - optional colors, neutral colors: +35, -37, +64, +22
4. hook pants, copy, image - adjustment - optional colors, neutral color: -29, -48, -31,0. Ctrl + L pants in levels of light, color scales: 0,0.81,175
5, tick hair, reproduce, need not be very clean, a little edge background color, can make hair even more integration, tick the background,
6. color, image - adjustment - optional colors, neutral colors: -30, -47, +100,0.
7. election in the background layer, (no hair, no skin, no pants that layer), according to Q to enter quick mask, select the gradient tool, black to transparent gradient from top left to bottom right corner pull, that the scope of black getting elected, Q to exit Quick Mask can, Levels: 0,0.32,255
8. using the same method to tune out the left side of the light source, press Ctrl + A, Ctrl + Shift + C, Ctrl + V, all layer are copied to a layer, into the top, superimposed, the color more vivid,
9. the details section (whites of the eyes, eyes, lips, slippers, nail) color, add in the final map lighting effects feel the car drove up,


Photo Name: classic movie poster making,
1. Open the original image, duplicate the layer,
2. new blank layer, fill it with black, put to the background copy of the following,
3. adjust the copy of the coating, select the Lasso tool to figure out a large bust cycle, emergence 30, Ctrl + Shift + I Invert Selection, Delete remove,
4. create a new layer . Blending mode to So in the heavily black and white picture, the color of the decoration is very beautiful.
5.Ctrl + L tone good order, the image compression down a bit, 116,1,255
6. Create a new layer, add text, add a paragraph of text each preferably create a new layer, so that comparison of the layout flexible,


Photo Name: Large, purpose is only to make the stone a level
3. the right to adjust the blue channel copy to the inside layer, and to add the color you want, I used the deep orange
4. the base map Copy the red channel layer, with a mask to remove the sky and stone, leaving only the lawn, and to add color with the Gradient Map
5. Open the material lightning ball, copy the contrast of the red channel to have the largest file
6. Select the layer blend mode to Overlay and adjust the location and size, making it a light source, remove some unnecessary things (to decide), then use the radial blur filter to handle it radiation, allowed the formation of emission beam
7. to copy the base map of the red channel inside the channel, enhancing the contrast, so that the grass part of the high-light revealed more pronounced, and then select the layer of high optical part of the paste inside, with white fill, layer mode to Overlay, then part of the mask to remove the sky with white, leaving only part of the grass so the grass there is bright light in the light perception
8. Select the mask layer 1 and then invert the selection, selection by the sky, adding curves and Hue / Saturation adjustment layer to adjust according to personal preference and the purity of the color you like
9. Finally, some posters add elements to the real thing looks ######## posters, in the use of color, I try to choose the gold and stone to color phase embellishment, so that colors vary between echo


Photo Name: quote the classics, the master of ideas and creativity,
1. Open the original image, create a curve adjustment layer, click Automatic 3. Open the sky material, Ctrl + A Select All, Ctrl + C copy, Ctrl + V paste, Ctrl + T to free transform the appropriate size and position drawing, mixed-mode stack, with a rubber or brush on the mountains and the blue lake clouds wipe
4.Ctrl + J copy the sky layer, Ctrl + T right > 5. in the replication layer of the sky layer to enhance the texture of clouds in the sky,
6. stamp visible layers (Ctrl + Alt + Shift + E), Filter - Blur - Gaussian Blur. Radius of 15, mixed mode to Soft Light,
7, add a Hue Saturation adjustment layer, saturation -35, so that the screen is more gentle,
8. Add a channel mixer adjustment layer, the red channel +100,60 , -8, green channel 30. +100, if the intensity high, the beginning of the curve can be used to adjust the brightness level down, you can change the channel mixer adjustment layer of mixed-mode br>

Photo Name: sea beach,
1. Open the original, the new layer (Ctrl + Shift + Alt + N), and then stamp visible layers (Ctrl + Alt + Shift + E ),
2. into the channel, copy the green channel contrast relatively strong, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material delay in, create masks, struck a person
4. create layers, soft mode, to make the sky look better,
5. to do the water reflection, Ctrl + T Flip Vertical , the establishment of the mask, with a brush to draw their desired effect, Multiply mode effect better, because plans vary,
6. color, adjust according to personal habits, good use of the optional color,
7.Shift + Ctrl + Alt + E, stamp visible layers, layer mode Multiply, and then mask the darker corners of pressure, mainly for the water pressure of the dark, make the picture more balanced,
8. filter Mirror - Noise - Add Noise, number 3, the Gaussian distribution, monochrome, so that the same people and the sky, grainy,
9, the last fill the sky material


Photo Name: PS the photos transfer hand-painted effect,
1. open the original file, according to their own sense of color adjustment through the adjustment of the film, and dermabrasion, dermabrasion value not too much, (Neat image plug-in)
2. New Chart layer, the color is FEE7D6, (according to the color film character set), layer mode to Overlay and 25%,prada sneaker, 20% with a brush in the face and neck skin and light coating,
3. features of the detailed work, pull the the mouth, the emergence Copy (Ctrl + J), with the smudge tool to smear on the lip, so that the skin becomes soft and smooth lips (not too much strength)
4. Create a new layer to the lips and face Department of color, color FDC1D6, layer mode to color, with a brush at the side of the lip and face painting,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the high-light some of the lip with better tools, the range is the middle 20% of exposure, contrast enhance lips,
6. a new layer, color 8E1A25, brush pixel is 3, draw the inside of the inside, and then draw the lips of 2 pixels Department of lateral line, (high-light some parts of the line built dodge mask)
7. on the nose to circle the emergence, reproduction, use painting tools to be gentle around the nose refined, and then use the Dodge tool range is a high light, 20% exposure to enhance the high-light under the nose section, and then color 422B2D, a 2 pixel brush to draw the outline of the nose (if the short lines to make up for using better tools for the next)
8. circle on the eye brows Feather copy, with coated tools soft skin around the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, strengthening the high-light under the orbital part of the middle range of tools used to enhance and deepen the lines around the eyes,
9. coated tools used to apply some fine eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure of 20% to strengthen the high-light part of the eye, so that the eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes part (line Dodge tools to deepen the color depth can be used to make up) eyelashes lines can also be triggered by the path and some other methods,
11. with the Smudge tool to smear the prettier eyebrow, brow slightly darker color of the rough spots that smear back along the fade down, and then 2 pixels with a brush to draw eyebrows on the front lines of eyebrow, so eyebrows more structured,
12. smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the texture of the hair, not too much force to apply a uniform,
13. hair part applied to the brush with the normal interface, the (hair must be applied carefully)
14. Draw the hair texture to a new layer, layer mode to overlay, select the pencil pixels to 1 (the value of picture size according to figures to be), color, hair texture for the DFDFDF draw down the smooth lines
15. horsetail some select brush tool, brush lightly with a fork some of the paint along the texture, color, pattern layer above, br> 16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% of flow, color is white, draw dynamic forehead hair,
17. clothes and necklaces partly coated Apply the softer tool, Dodge tool and then choose the range of high light exposure of 20%, clothes and necklaces to enhance some of the high-light
18. Synthesis, sharpen the picture as a whole, sharpening is 8, with less light tools for high-bit processing optical parts, the overall color correction, the (modified to add some background light, highlighting the theme)


Photo Name: post-makeup Raiders,
1. Open the file , copy a layer copy of the
2. Select the duplicate layer by free transform to change the shortcut keys ctrl + t to make the characters more slender face shape
3. by Merge Layers (ctrl + e), the use of set cutting tools so that the screen from the new composition, cut to more parts of,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. Yellow - 40, -20, -30, -80. white -0,0,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) to adjust the overall color, RGB full channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the shadow -10,0, +15. Highlight - 10,0, +2.
7. With a seal tool to evenly cover the skin around the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the expression of facial muscles do not relax,
9. continued emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, feathering 60
11. curve lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy layer, to duplicate the layer move down, in order to achieve eyebrow shaping effect, stamp eyebrow shaping, this must be very careful
13. began to adjust the eyes, the election out of the eye part of the circle, copy layer
14. eye shadow pen circle the area to do, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part of the Hue and Saturation: 0, -40,0
17. Circle the details of the root of the upper eyelid eyelashes Department before the corner of lower eyelid 1 / 3, press DELETE key to delete the selection, the exposed high light-bit,
18. delete some more eye shadow, feather 40
19. circle the details to the upper inner corner eyelid 1 / 2, press DELETE key to delete the selection, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes after the curve adjustment layer of bright copy, pen brush back the first part of the left eye, showing some shadows,
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus look high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lip color
27. adjustment of the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light ): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm focus,
31. Finally, in the right places to complete with flashing brush


Photo Name: The photo ink into effect,
1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the brightness contrast, input 114, output 186
3. Duplicate Layer, Filter - Brush Strokes - ink outline, stroke length of 5, 10-look intensity, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. Add a light brown solid layer, Figure Cen Enchanter is the color, adjust opacity, not transparency, some as small as possible,
7. point out a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to restore hidden layers, modify the layer mode to overlay, by the effect to tune the details,
9. on the screen to fine-tune the overall effect until satisfactory results, no specific steps to vary


Photo Name: oil painting effect,
1 out first filmed images. the sky with mask mask
2 parts.
3 Add the sky section, and placed in the bottom of the screen can be adjusted.
4 new layer to the third layer, mainly to adjust the screen color.
5 changes on demand is not transparent, change the layer properties to Soft Light.
6 In order to find oil in the texture effect, the color layer of material above and then added a layer of
7 modified layer properties to Soft Light, opacity changes on demand. This opacity is 86%
8 add mask, according to the contents of the screen need for appropriate trade-off.
9 in order to strengthen a sense of texture, then create a new layer, fill gray.
10 In the Add Noise filter and check the color for the Gaussian distribution, the number of custom.
11 layer to Soft Light.
12 mask according to the screen need to be adjusted appropriately.
13 noise, Add Noise - number 400, Gaussian distribution,


Photo Name: commercials color and design,
1. Duplicate the layer, the new channel mixed adjustment layer, the gray channel, red +64% +2% green, blue, +10%, monochrome
2. New solid mixed layer, select the 575,046 color, blend mode to color,
3. new curves adjustment layer, ① - Input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. New layer of a solid color, select 443B25 color, blend mode to Color , hold down the Alt-click mask,
5.Ctrl + D to restore the default background color, Ctrl + Delete to fill the black mask the background color,
6. changing the screen, in the transition to high light and dark parts of the tone, in order to enrich the color, with a brush inserted in the mask
that need some color, 300 pixels, opacity 10%, flow 100%
7. arrangement and design of the font
8. To make figures and screen colors have echoed to the point of the characters lips lip gloss, a new layer, select the Linear Dodge Blend Mode, added 90753D color, select the appropriate brush on lip gloss, scatter brushes, pixels 39,
9. amplification, the lip gloss reflective paint parts, observe and continuous adjustment, drawing a look after the overall good lip gloss, this time the screen has a echoed the colors become rich, but also not overwhelming, just bring out a product,
10. If the product directly with the body in the model, and people tune in to lust after products in the color or use a mask out of the product can be directly inserted.


Photo Name: Wizard of supernatural effects,
1. Open the image, duplicate the layer,
2. dermabrasion simple, choice - the color range of point of their skin with a straw color, 103 color tolerance around, Ctrl + J be a new layer, Ctrl click to select, add the mask, with a brush (the foreground color to black), remove the hair around with some,
3. Filter - Blur - Gaussian blur of 1.7 pixels and reduce the layer opacity to achieve a natural dermabrasion effect,
4. Select - color range, hair color draw with a straw, with straw + increase in the middle of the selection, the new curves adjustment layers, increase contrast, according to the picture properly adjusted,
5. the left mouse button mask curve 1, there constituencies, the new Levels adjustment layer Levels: 16,1.11,214
6. New hue saturation adjustment layer, red: -54, Yellow: -100
7. create a new group,a&f outlet online, to incorporate all of the above adjustment layer to facilitate the finishing trim,
8. New Group, for the hair color decoration, a new layer, with a brush (white), hardness 0, Layer Properties soft mode,
9. Create a new layer with the pen tool hook lines (Pearl path), arbitrary lines, neat point, straighten out the hair chaos in the orderly,
10. with the brush tool, F5 shortcut key to bring up the brush settings dialog box, pixel 13, the hardness of 100%, 105% pitch, dynamic shape, smooth, angle 0, roundness 100 %,
11. switch to the path panel, select Stroke Path point of the right triangle to determine,
12. Double-click the path layer pearl, set the layer mode,2010 air jordan shoes, Projection: structure - Multiply, black, opacity 28%, angle 120 °, from 0, extension 0, size 5 pixels, the quality - variegated 0. Bevel and Emboss: structure - embossed effect, smoothing method, the depth of 120%, direction, the shadow - the angle 120 °, Multiply end model, white, 33% opacity, Shadow mode Multiply, sky blue, opacity 36%.
13. with rubber tooling shape, add a mask, opacity 32%, applied beads, making beads and hair below the actual situation with,
14. Create a new layer, the arrangement of different sizes with a snow brush screen, adjust the snow layer styles, projection: structure - Multiply, black, angle 120 °, use the global light, distance 7, the expansion of 5%, size 1. The projection: Multiply, black, 12% opacity, angle 120 °, from the 7, blocking 10%. Outer Glow: structure - color filter, opacity 73%, lake blue pixels - the soft way, the size of 5 pixels, the quality - range of 50%. Bevel and Emboss: structure - Outer slope style, methods, smooth, 281% depth, direction, the shadow - the angle 120 °, using global illumination, height 30 °, high light pattern color filter, 75% opacity, shadow mode Multiply, black, opacity 75%
15. New soft coating, copy the background layer, selection foreground color (blue lake), R = 133, G = 244, B = 244
16. New Layer , brush hair, range,
17. new color layer, foreground - # 6fc8c8, R = 111, G = 200, B = 200,
18. new color layer, brush hair and beads on top of snow can be used eraser, set low opacity, transition. Range of local hair coloring, multi-layers can be more natural.
19. loaded brush Star decoration interface,
20. to the skin, soft blue brush the whole layer, add cold tone and unity of the screen. Skin color has nothing to do new group, the new skin and soft layers, line brush hardness to 0, the foreground color to the lake blue. To the faces, light and dark being of high distinction, used in blue and pink. Multi-layers of the transition to the natural draw.


Photo Name: PS to the landscape watercolor effects,
1. take a photo with a white edge image landscape plan, as do the white side of the edge spillovers
2. hue saturation : +80 saturation, adjust the effect of the Impressionist,
3. Edit - Define Pattern.
4. built white fill layer, 50% opacity, to build a transparent layer
5. pattern stamp tool, brush the main diameter of 200, the pen comes with wet media brushes 45 election, mode normal, opacity 100% , check in front of impressionist effect,
6. in a transparent layer pattern stamp painting, vision plays King strokes large and small details of the multi-hand strokes, adjusting the opacity of the top layer of the brush strokes view,
7. Copy Background layer to color filters - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. filter - distort - the light diffusion 37%


Photo Name: A magical picture effect,
1. sketched with a pen on the back of a wing shape,
2. in the current working directory into the path 1 , double-click the work path.
3. the path into a selection (Alt + Enter), copy the layer, emergence 3 pixels,
4. filled with white, select the appropriate intensity of use of painting tools, apply the appropriate edge.
5. Duplicate the layer, filled with different color that can be differentiated Layer 1, Layer Properties regulating transparency Oh,
6. in accordance with the method of production of a second in front of the wings, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. new layer and draw a circular selection using the brush circle in the constituency, then adjust the transparency,
8. Copy paste into the new background layer The Alpha-channel, among other places outside the top left corner of the black filling, use the Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. Select Alpha channel (the channel holding down Ctrl), in Figure floor area new layer, fill light yellow,
10. with a pen generated beam path, the path into a selection, yellow and white gradient fill color,
11. adjust transparency, rub with the eraser at the bottom of the light is
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100.