Overview
driving position and steering wheel grip
throttle, clutch, foot brake foot method
increase file operation sample
downshift operation example
consecutive right turn
left turn
successive start essentials
Zhuangkao (site down library) line and order
inverted Treasury (left bank)
shift library (binary two back) one of the beyond shift back
Library (binary two back) of the two back into the two designated parking
grab essentials file essentials
Modified files with the throttle after the
essentials above the details of use of the hold (Supplementary)
uphill essentials
single (double) line
road on the road in single line (alternatively no department of the centre line of the two-lane road) customary pedaling, the best driving position is a bit more navel of the road right- , which is the center of the driver sitting in the road forwards.
resolution
1, cozy to control the direction: the general curved middle of the road is high on either sides of low, middle-right side when driving the vehicle will be the right line, then only left hand to gently stroke the steering wheel to the left with the freedom to live will be competent to control the direction of the vehicle straight.
2, is favorable to overtaking cars and intersection: the right-side driving, the vehicle can be at a delicate angle towards the side of the road and the vehicle to bench.
3, to facilitate the vehicle turned sharply: one-way road with reference to the left, rotate right.
single (double) right turn lane
1, vehicle line to cut corners about 30 meters away from the corner (or control the speed), and cars tend to drive the left to reach the turn in the road turn right to leave enough width as the standard discrepancy within a round, reaching the corners (the direction of play) to achieve the best turning speed.
2, playing under the direction of turn to the right size, and disburse attention to maintaining (control) a good speed.
3, when the bend near the end turn: If there is to the front vehicle, the vehicle can be toward the road, and access control based on whether speed or parking; if the front is no vehicle or obstacle can be the vehicle directly to the normal driving route back positive; back to the direction should be based on the size of the master curve appropriate amount in advance.
single (double) left turn lane
1, vehicle line to deduct from about 30 meters away from the corner (or control the speed), and cars tend to the right lane to reach corners close * to the right side (narrow) as the standard, reaching the corners (the direction of play) to achieve the best turning speed.
2, under the direction of turn to the left the size and attention to maintaining the (control) a good speed.
3, when the stoop close the end turn: If there is to the front car, you can straight the vehicle back toward the road on the right and likelihood of way control based on speed or parking; whether there is no vehicle or obstacle in front can be vehicles directly to the normal driving routes back assured; back to the direction should be based on the size of the main curve appropriate quantity in advance.
single (double) line the road continuous curves
(example)
The figure is a first left turn before turning right and then turn left small continuous turn road
1, vehicle line to cut corners approximately 30 meters away from the turn (or control the speed), and driving the right cars tend to reach the turn of the road bear right (alley) as the criterion When reaching the turn (the direction of play) to achieve the best turning speed.
2, under the direction of turn to the left the size and attention to maintaining the (control) well.
3. When a vehicle near the end turn left turn, the time has been able to entirely look the road ahead is to turn right, turn the steering wheel should be properly in advance, when it reaches the right corner and quit ample in the road turn right difference in wheel length, circular and round the right direction, while nourishing the best attention to the turning speed.
4, when the right turn near the turn finished, then will be able to see in advance and a small left turn in front of a small left turn after the straight road conditions, the most common locations are the emulating two:
(a) of the road in front of a small turn left or go straight to car: Turn left to turn right and essentials for the light turning left a small corner in the left corner will be referred to the small end, the advance direction of circulation, the vehicle by the straight road the right side, and note the passageway beneath the road ahead could slow or stop at any time.
(b) of the road in front of a small turn left or go straight there is no vehicle: to be completed before the right turn, turn the steering wheel along, ignoring the small left turn, straight road instantly toward the vehicle back to creature normal driving paths, and appropriate vehicle speed in advance.
stalls to eat for addition and subtraction and use
file (with file) basic principles:
file the appropriate speed and stall phase: from the low Speed is the most high-speed plasticity of this file, as far as possible to avoid prolonged use of the lowest or the most high-speed;
shift (adding, subtraction document): In conviction, by the time the speed scope to attain document, you can shift, to think the trade-off stall speed, power and economic;
tow file: less than maximum commonly known as low-speed tow files, shuffle files incapable to make the vehicles, before and after the traverse, solemn will outcome in engine flameout;
upshift: When the speed to high speed of a file, it should be implemented upshift, in general, high-speed car in time for the file upshift engine speed 3500-4500 r / points;
reverse gears: When the minimum speed near the stall speed, it should be implemented reverse gears, high-speed car Tuidang should grab the chance to speed in this file - in the low range, not the latest low minimum speed of the file; reverse gears timing and power requirements should be based on the road to master;
the use of stalls under another road conditions:
speed increases file: Before moving into the normal speed, it should try to amplify the speed of this file (in the high engine speed corresponding to speed) in order to add files after the vehicle has enough power performance; uphill in the implementation of this is especially important when adding files;
to maintain dynamic stall: the uphill road to adapt the speed and general road driving, stall speed should be kept in the speed (engine speed operation state), so that when the vehicle has enough impetus and speed can be adjusted representation;
normal driving: normal driving,
Womens Gucci Casual Trainers, speed does not need much adjustment, the stall speed culling is low, to facilitate the voyage of the economy;
downhill with file:
downhill in general non-hazardous, can be properly linked to high gear, downhill resistance, haste is good, add file operation can be carried out in advance,
Mens Gucci Boots, can be linked to high-grade oil;
down a long slope with file: Next long slope, in order to avoid lengthened use of the brakes, resulting in dwindled efficiency and stop failure, it should be linked to the corresponding low-end, to contain the use of the engine speed; with the principle of files without the need for long-term use stop control for the degree of deceleration;
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
shift operation: depresses the clutch pedal - quickly loosen the throttle - change the file to the required gear - According to file with the suitable speed throttle (or do not deserve the throttle), meantime the clutch quickly carried to the point of contact half-contact state - completely smooth gently release the clutch pedal.
throttle and clutch and practical education with the throttle and clutch with
likewise known as the oil from the co-ordination with the oil from the fast and accurate driving operation in a very important role to play, the mutual have started the match after the shift, ramp start, ramp to stop hanging and so on.
oil with the two key operations from a one-rush hour the throttle with the clutch in place and point of contact in place, place the throttle a little earlier than the point of contact should be in place, operating with the throttle a good general does not seem empty (sound) and pediment car plucking feeling.
off the accelerator operation training: at massive, medium and small-press the throttle distort throttle and a one-time train hold, distort or lower oppression direction as the direction of the reference amount of the engine tachometer and engine sound;
clutch in area a one-time operation exercising point of contact: first step on the clutch in the end - slowly carried to the point of contact and prop the memory of this place - the clutch foot in the end and rapidly carried behind to its elemental rank - again practicing the above action to be a one-time elevator truck in place and there is tiny sense of dynamic prevail.
with oil from the operation of training: twist the throttle pressure while carrying clutch - car has a dim sound a little throttle activity, the feet the same time to stabilize. Exercises to be easy, accurate operation is appropriate.
low-speed control training (multi-start method)
multi-start method: the absence as fewer than the initial file (usually 1,2 file) the low-speed, you can use control of speed, you can control is mighty and safe to eat for practical; multi-start method is a quite important practical application, the use of very roomy range,
Gucci Wallet UK, such as: the city center zone with the car, space vehicles, shift, exact turn to find points, practical reversing inverted Treasury, before and later a short distance, the busiest section of a U-turn and so on.
low-speed control training (multi-start method) operation:
multi-start means appoint implies, is to begin overlapping, the speed avail of the inertia of starting off the afterward linkage, repeated operation, to achieve cheap in the starting stalls speed driving purposes. The initial speed of multi-start method begin from the speed,
Womens Gucci Tall Boots, but its elite is the use of speed inertia. Operation should be famous that, for the start did no really complete, approaching the minimum starting speed or file corresponding to the starting stalls throttle speed, so the clutch drive during the operation can no entirely let go, merely according to the process has started to speed to take advantage of its inertia, inertia is required at the clutch.
Operation: lift the clutch with the throttle to the point of contact - is expected to speed the inertia can be secondhand when depressing the accelerator release from the merger - to stop or slow to hasty speed again with the throttle stop and lift the clutch to the touch point - Repeat the above action;
speed when vehicle is stop and go when needed, generally preferable to one file repeat start; when the roads need to slow the speed quickly, generally, is appropriate to do 2 files re-start;
multi-start method is correct,
Womens Gucci Sandals, amenable use:
1, multi-start method according to the needs and semi-linkage (also known as pressure clutch) used in association with the car and the ramp can be achieved can reduce wear and friction clutch friction plate heat;
2, the current side (or rear) close to the situation, the use of inertia clutch, felt security hazards, it can also defend the back of the brake to assure traffic safety;
3, a safe distance from the start when the extension of the implementation of speed, close to the target utilization rate of inertia, the use of continuing pm (depressing the clutch) can be implemented at any time to implement braking and steering.
Category
immediately driving authorize categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P, a total of 15
category and code for driving the following:
large passenger buses A1 A2 car
tractor cumbersome, medium-sized trailer, Tractor Trailer
A3 gist urban bus with more than 10 cities set
medium passenger bus B1 medium-sized passenger car
B2 large heavy goods vehicles, medium trucks,
Gucci Shoes UK, etc.
C1 small car small, micro-compact passenger cars and other
C2 small auto car, automatic mini
passenger cars and other low-speed truck C3 truck speed (the original four wheel farm vehicles)
three cars C4 wheel vehicles (the original three-wheeled plough vehicles)
ordinary three-wheeled motorcycle engine displacement greater than 50ml D three-wheeled motorcycle
E ordinary motorcycle engine displacement greater than 50ml of 2
moped motorcycle engine displacement of less than or equal 50ml F motorcycle
M cycled wheeled mechanical vehicles own their own machinery trolley motorcar
tram trolleybus N P tram
hope namely the knowledge you learn to drive friends help.
Graphic techniques apt drive
Linear Mode
