| Back to logs list
142911 2011 年 01 月 05 日 14:23 Reading (loading. ..) Comments (0) Category: Personal Diary
external network access in several ways:
1.
Static IP public network access,
new balance running shoes, or if you can contact the telecommunications operator China Netcom to provide static IP public network so the network only to the relevant IP, netmask, gateway parameters into the device complete DVR / DVS
and then restart the device to connect through the client software or IE enter the IP to implement a remote access for equipment.
2.pppoe access
DVS supports PPPOE auto-dialing function ADSL Modem for dial-up connection to get access to the public network IP address, the method is:
one: the device ip,
。。。。爱。。。。。。。。同胞加油。。。。。。。爱 - Qzone日志, mask, gateway are set to 0.0.0.0
Second: Open PPPOE ADSL dial-up input username and password and then reboot the machine.
three: After re-starting device then wait IP address will be displayed in the dial-up access to the IP address, and then the public network through dial-up access to IP addresses.
obtained in this way, but ip address is dynamic,
new balance sneakers, then the result will give the user access problems, IP is always changing.
a solution is in a static IP address with a public network of computers running the software we provided IPSERVER, fill in the computer IP address DNS address into the device, then the software can in IPSERVER he found the DVR's IP address, product serial numbers and so on,
出来玩，迟早要还噶(绝啊~绝对够绝的) - Qzone日志, through the client software to access, registration will be up mode selection for the way to access the device; but way more users or third approach,
new balance shoes, see 3.
3. router mode access.
DVS / DVR connect to the router, set the DVS ip address, netmask, gateway (set to the router within the network IP) and hard disk recorder in a network segment, routers, dial-up or
other way to get IP in public network router to do port mapping, dynamic IP router if the router's DDNS function through to binding domain,
new balance outlet, the client software or through direct input
IE way to access the domain name.
above is all the way outside the network access equipment, as are two ways to access ways to to visit:
one: IE input device by IP address or domain name (either LAN or intranet), as long as know the device IP address or domain name, and through the ping command to view the network connection is normal,
new balance mens, then can In the IE address input device to access IP address domain name, only the first visit by IE needs to DVR / DVR to download a control, reduce your IE security level,
The driver the highest level of standards you yet, the control successfully installed, you can enter the login screen enter the DVR / DRS User Password (default is admin 12345) visited.
II: The client access, first in the configuration of the middle of the white area to create a region on the right-click and then click the zone name, select Add Device
fill out the following diagram the parameters, fill in After clicking OK, and then double-click on the preview channel name to preview the images.
Note: If you do use the peanut shells, etc. DNS access, you need to fill in the client software configuration information Hoi's IPSERVER software used to do domain name resolution then please select the registration mode to / p>