bingfess9644
04-30-2011, 06:39 PM
This step by step directions on how products in the Windows Server 2003 for Domain Name System (DNS) configuration Net entry. DNS could be the core of Web identify resolution on the use of equipment. Accountable for the host name and Internet deal with resolution in between.
How you can run Windows Server 2003 from a separate server to begin
Independent operating Windows Server 2003 DNS server as the network server. The first phase, you assign this server a static Online DNS servers will need to not use dynamically assigned IP addresses because a dynamic alter could cause clients to shed contact with all the DNS server.
Phase 1: Configure TCP / IP
Open Network Connections, after which use the correct view the properties of your neighborhood connection.
Select World-wide-web Protocol (TCP / IP). See its properties.
Click on the Common tab.
Pick
Choose the Innovative alternative inside the DNS tab.
Click on the Append main and connection specific DNS suffix.
Click on to pick extra primary DNS suffix from the father or mother suffix verify box.
Click on to choose the Register this connection's DNS deal with within the box.
Be aware that running Windows Server 2003, DNS server, DNS server ought to be designated as its personal.
If the server needs to resolve names from its World-wide-web services provider (ISP) identify,Office 2010 (http://www.office2007key.ca/office-2010-key), you have to configure a forwarder. Later in this particular post the right way to configure the transponder area will go over the transponder. Click on Okay three occasions.
Be aware: When you obtain one in the DNS
Caching Resolver service, warning, click The caching resolver is attempting to get in touch using the DNS server, but you have not completed configuring the server.
Stage 2: Set up the Microsoft DNS server
Click Start, point to Manage Panel,Microsoft Office Professional Plus 2010 (http://www.windows7-key.us/office-2010-key), after which click Add or Eliminate Systems.
Click on the
In the Components record, click Networking Services (but do not pick or clear the examine box), after which click on Details. Click on to choose the Domain Identify Program (DNS) examine box, and then click on Ok.
Click Subsequent.
When prompted, the Windows Server 2003 CD-ROM into your computer's CD-ROM or DVD-ROM drive.
When set up is complete, the completion of Windows Elements Wizard page, click End.
Click Near to close the Add or Eliminate Software programs window.
[Page]
Action 3: Configure the DNS server
To make use of the Microsoft Management Console (MMC) DNS snap-in configuring DNS, please adhere to these actions:
Click on Start, position to Systems, position to Administrative Instruments, and then click on DNS. Right-click Ahead Lookup Zones, after which click on New Zone.
When the
Then you'll be prompted to get a zone sort. The zone types include:
Key regions: to generate on this server can update a copy on the area. This location information and facts is saved in a. Dns text file.
Secondary zone: Standard secondary DNS server from its master copy of all specifics. The main DNS server may be configured for regional Lively Directory replication, primary, or secondary zone. Notice that it is easy to not modify the secondary DNS server zone information. All information are copied from your primary DNS server.
Stub zone: Stub zone consists of only identify the authoritative DNS server in the area the resources required records. These useful resource information include Title Server (NS), Begin of Authority (SOA) and possibly glue Host (A) record.
Active Directory, along with a storage location for that choice. This alternative is just DNS server is really a domain controller is available.
The new ahead lookup zone need to be a primary or an Lively Directory-integrated zone to ensure that it can accept dynamic updates. Click Main, after which click on Subsequent.
The new zone consists of the Energetic Directory domain determined by the locator records. Region identify need to be Energetic Directory-based domain title the same, or will be the identify from the logical DNS container. For example, if according to Lively Directory domain named
Accept the default title for that new zone file, click Next.
Observe: Experienced DNS administrators may perhaps wish to produce a reverse lookup zone, it's recommended that they delve into this branch in the wizard. DNS server can resolve two fundamental requests: a ahead lookup and reverse lookup. Ahead lookup is far more widespread. A ahead lookup resolves a host identify with an A reverse lookup resolves an IP handle having a PTR or Pointer Useful resource record the host identify. For those who configure a reverse DNS zone, you possibly can make your authentic forward record automatically make associated reverse documents.
Phase three: Configure the DNS server
To use the Microsoft Management Console (MMC) DNS snap-in configuring DNS, make sure you stick to these actions:
Click Begin, stage to Software programs, level to Administrative Instruments,Office 2010 Code/ (http://www.office2010-key.co.uk/), after which click on DNS. Right-click Ahead Lookup Zones, after which click on New Zone.
Once the
Then you may be prompted to get a zone sort. The zone sorts include:
Main places: to produce on this server can update a copy with the region. This location info is saved inside a. Dns text file.
Secondary zone: Regular secondary DNS server from its grasp copy of all details. The main DNS server can be configured for regional Lively Directory replication, main, or secondary zone. Be aware that you can actually not modify the secondary DNS server zone data. All data are copied through the primary DNS server.
Stub zone: Stub zone consists of only determine the authoritative DNS server in the area the resources required information. These resource documents include Name Server (NS), Begin of Authority (SOA) and probably glue Host (A) file.
Active Directory, as well as a storage location for your option. This option is only DNS server can be a domain controller is available.
The brand new ahead lookup zone must be a primary or an Energetic Directory-integrated zone so that it can accept dynamic updates. Click Primary, and then click Next.
The brand new zone includes the Lively Directory domain determined by the locator information. Area title should be Active Directory-based domain name the identical, or may be the identify of your logical DNS container. As an example, if determined by Active Directory domain named
Accept the default name for the new zone file,Office 2010 Download (http://www.office2010-key.us/), click Next.
Note: Experienced DNS administrators may well need to make a reverse lookup zone, it can be recommended that they delve into this branch from the wizard. DNS server can resolve two basic requests: a forward lookup and reverse lookup. Ahead lookup is extra common. A ahead lookup resolves a host name with an A reverse lookup resolves an IP deal with having a PTR or Pointer Useful resource file the host title. Should you configure a reverse DNS zone, you possibly can develop your unique ahead report instantly generate connected reverse records.
How to configure the root hints
Windows can use root hints. Root Hints resource documents can be stored in Active Directory or text file (percent SystemRoot% System32 DNS Cache.dns) in. Windows uses the standard Internic root server. In addition, when operating Windows Server 2003 server queries a root server, it is going to use the most recent record of root servers to update alone.
Click Begin, point to Administrative Tools, and then click DNS.
Right-click ServerName, exactly where ServerName is the identify in the server,Genuine Office 2010 (http://www.windows7-key.eu/office-2010-key), after which click on Properties. Click on the Root Hints tab. DNS
Server's root servers listed in the name on the server listing.
The way to configure the DNS proxy in the firewall and Network Address Translation (NAT) products can restrict accessibility to ports. DNS utilizes UDP port A and TCP port 53. DNS Services Management console also utilizes RCP. RCP uses port 135. Once you configure DNS and firewalls, these troubles can occur.
How you can run Windows Server 2003 from a separate server to begin
Independent operating Windows Server 2003 DNS server as the network server. The first phase, you assign this server a static Online DNS servers will need to not use dynamically assigned IP addresses because a dynamic alter could cause clients to shed contact with all the DNS server.
Phase 1: Configure TCP / IP
Open Network Connections, after which use the correct view the properties of your neighborhood connection.
Select World-wide-web Protocol (TCP / IP). See its properties.
Click on the Common tab.
Pick
Choose the Innovative alternative inside the DNS tab.
Click on the Append main and connection specific DNS suffix.
Click on to pick extra primary DNS suffix from the father or mother suffix verify box.
Click on to choose the Register this connection's DNS deal with within the box.
Be aware that running Windows Server 2003, DNS server, DNS server ought to be designated as its personal.
If the server needs to resolve names from its World-wide-web services provider (ISP) identify,Office 2010 (http://www.office2007key.ca/office-2010-key), you have to configure a forwarder. Later in this particular post the right way to configure the transponder area will go over the transponder. Click on Okay three occasions.
Be aware: When you obtain one in the DNS
Caching Resolver service, warning, click The caching resolver is attempting to get in touch using the DNS server, but you have not completed configuring the server.
Stage 2: Set up the Microsoft DNS server
Click Start, point to Manage Panel,Microsoft Office Professional Plus 2010 (http://www.windows7-key.us/office-2010-key), after which click Add or Eliminate Systems.
Click on the
In the Components record, click Networking Services (but do not pick or clear the examine box), after which click on Details. Click on to choose the Domain Identify Program (DNS) examine box, and then click on Ok.
Click Subsequent.
When prompted, the Windows Server 2003 CD-ROM into your computer's CD-ROM or DVD-ROM drive.
When set up is complete, the completion of Windows Elements Wizard page, click End.
Click Near to close the Add or Eliminate Software programs window.
[Page]
Action 3: Configure the DNS server
To make use of the Microsoft Management Console (MMC) DNS snap-in configuring DNS, please adhere to these actions:
Click on Start, position to Systems, position to Administrative Instruments, and then click on DNS. Right-click Ahead Lookup Zones, after which click on New Zone.
When the
Then you'll be prompted to get a zone sort. The zone types include:
Key regions: to generate on this server can update a copy on the area. This location information and facts is saved in a. Dns text file.
Secondary zone: Standard secondary DNS server from its master copy of all specifics. The main DNS server may be configured for regional Lively Directory replication, primary, or secondary zone. Notice that it is easy to not modify the secondary DNS server zone information. All information are copied from your primary DNS server.
Stub zone: Stub zone consists of only identify the authoritative DNS server in the area the resources required records. These useful resource information include Title Server (NS), Begin of Authority (SOA) and possibly glue Host (A) record.
Active Directory, along with a storage location for that choice. This alternative is just DNS server is really a domain controller is available.
The new ahead lookup zone need to be a primary or an Lively Directory-integrated zone to ensure that it can accept dynamic updates. Click Main, after which click on Subsequent.
The new zone consists of the Energetic Directory domain determined by the locator records. Region identify need to be Energetic Directory-based domain title the same, or will be the identify from the logical DNS container. For example, if according to Lively Directory domain named
Accept the default title for that new zone file, click Next.
Observe: Experienced DNS administrators may perhaps wish to produce a reverse lookup zone, it's recommended that they delve into this branch in the wizard. DNS server can resolve two fundamental requests: a ahead lookup and reverse lookup. Ahead lookup is far more widespread. A ahead lookup resolves a host identify with an A reverse lookup resolves an IP handle having a PTR or Pointer Useful resource record the host identify. For those who configure a reverse DNS zone, you possibly can make your authentic forward record automatically make associated reverse documents.
Phase three: Configure the DNS server
To use the Microsoft Management Console (MMC) DNS snap-in configuring DNS, make sure you stick to these actions:
Click Begin, stage to Software programs, level to Administrative Instruments,Office 2010 Code/ (http://www.office2010-key.co.uk/), after which click on DNS. Right-click Ahead Lookup Zones, after which click on New Zone.
Once the
Then you may be prompted to get a zone sort. The zone sorts include:
Main places: to produce on this server can update a copy with the region. This location info is saved inside a. Dns text file.
Secondary zone: Regular secondary DNS server from its grasp copy of all details. The main DNS server can be configured for regional Lively Directory replication, main, or secondary zone. Be aware that you can actually not modify the secondary DNS server zone data. All data are copied through the primary DNS server.
Stub zone: Stub zone consists of only determine the authoritative DNS server in the area the resources required information. These resource documents include Name Server (NS), Begin of Authority (SOA) and probably glue Host (A) file.
Active Directory, as well as a storage location for your option. This option is only DNS server can be a domain controller is available.
The brand new ahead lookup zone must be a primary or an Energetic Directory-integrated zone so that it can accept dynamic updates. Click Primary, and then click Next.
The brand new zone includes the Lively Directory domain determined by the locator information. Area title should be Active Directory-based domain name the identical, or may be the identify of your logical DNS container. As an example, if determined by Active Directory domain named
Accept the default name for the new zone file,Office 2010 Download (http://www.office2010-key.us/), click Next.
Note: Experienced DNS administrators may well need to make a reverse lookup zone, it can be recommended that they delve into this branch from the wizard. DNS server can resolve two basic requests: a forward lookup and reverse lookup. Ahead lookup is extra common. A ahead lookup resolves a host name with an A reverse lookup resolves an IP deal with having a PTR or Pointer Useful resource file the host title. Should you configure a reverse DNS zone, you possibly can develop your unique ahead report instantly generate connected reverse records.
How to configure the root hints
Windows can use root hints. Root Hints resource documents can be stored in Active Directory or text file (percent SystemRoot% System32 DNS Cache.dns) in. Windows uses the standard Internic root server. In addition, when operating Windows Server 2003 server queries a root server, it is going to use the most recent record of root servers to update alone.
Click Begin, point to Administrative Tools, and then click DNS.
Right-click ServerName, exactly where ServerName is the identify in the server,Genuine Office 2010 (http://www.windows7-key.eu/office-2010-key), after which click on Properties. Click on the Root Hints tab. DNS
Server's root servers listed in the name on the server listing.
The way to configure the DNS proxy in the firewall and Network Address Translation (NAT) products can restrict accessibility to ports. DNS utilizes UDP port A and TCP port 53. DNS Services Management console also utilizes RCP. RCP uses port 135. Once you configure DNS and firewalls, these troubles can occur.